Floating Cone Algorithm with A concrete mining example

Economic factors such as costs and expected revenues, which vary with grade and block location, are then applied; the result is an economic block model. Some of the blocks in the model will eventually fall within the pit, but others will lie outside. Of the several techniques for determining which of the blocks should be included in the final pit, the most common is the floating cone technique. In two dimensions the removal of a given ore block would require the removal of a set of overlying blocks as well. All of these would be included in an inverted triangle with its sides corresponding to the slope angle, its base lying on the surface, and its apex located in the ore block under consideration. In an actual three-dimensional case, this triangle would be a cone. The economic value of the ore block at the apex of the cone would be compared with the total cost of removing all of the blocks included in the cone. If the net value proved positive, then the cone would be mined. This technique would be applied to all of the blocks making up the block model, and at the end of this process a final pit outline would result.
 Source: ENCYCLOPÆDIA BRITANNICA

In this poste  we diccover Floating Cone Algorthm in Article 1, and we take A concrete mining example in Article 2

From here: https://easy4downloader.blogspot.com/2019/09/floating-cone-algorithm-with-concrete.html

Top Soil Technical Project

From  (Technische Universiteit Delft)

Introduction

As an owner of a contracting company, a proposal offer has to be made which gives the best most profitable price per bank cubic meter for a pre-stripping mining operation.

First,  the total volume that has to be excavated is calculated. Then, a plan has to be designed in what order the mine is excavated. Dumping sites and access roads influence the strategy in which the mine is going to be excavated. After this is done, different scenarios using different machinery are designed. Using these scenarios, different costs calculations can be made and a price per bank cubic meter can be offered. With this price, a conclusion can be made on what the best scenario for this project is and therefore the most profitable for the contracting company.

Read More by  Downloading  this free  PDF(1.1 MB)

From Here: https://easy4downloader.blogspot.com/2019/09/top-soil-technical-project.html

Table of contents

i. Introduction

ii. Methods

iii. Results

iv. Conlusion

v. Appendix

Synthesis - summary -complete formula

summary complete formula

Extraction of Resources (Technische Universiteit Delft)

·        Soil classification

·        RQD

·        RMR

·        UCS test

·        SURFACE - EXCAVATION. LOADING AND CASTING UNITS

·        Excavation methods

·        Underground mining Methods

·        Shaft location

·        Wast support method

·        Production (m3)

·        Cycle time

·        Principal Stresses

·        Mohr's circle of stress Derivation

·        Estimating horizontal in situ stress
Vertical compression- assumptions

·        Stress magnitude and rock cracking around excavations

·        Principal stress directions

·        Initial σ  and their measurements-Hydraulic fracturing

And more….

 

Download this free summary in PDF

 

http://fumacrom.com/1xVTE 

Or

Mirror